Enjoy this 3-piece, Detroit Lions Bambu X1C door handle!
I designed this with the intention of printing face down on the build plate to produce grain-like texture once glued together. All 3 pieces can fit on one build sheet if printing with AMS, or can be printed individually.
SHOULD BE PRINTED WITH 0.2MM NOZZLE FOR BEST RESULTS.
The main body will print with a block depth of 10mm from glass to back of Lions logo.
NOTE: I painted the mounting block portion of this layer black in Bambu Studio, while leaving the base layer of the Lions logo Grey, in order to give it more of a floating look once mounted to the glass door.
The base of the Lions logo will print with a thickness of 5mm (15mm total with base block)
The White (2nd layer) of the Lions logo will print with a thickness of 1mm.
The Blue (3rd / Top layer) of the Lions logo will print with a thickness of 0.5mm.
Overall dimensions are 57.95mm wide x 44.08mm tall x 17mm thick.
NOTE: Increasing the thickness of any layers should be okay. I printed the blue top layer thinner so the white layer underneath showed from more than a straight-on viewing angle. If altering the length or width of any of the layers, especially the bottom main layer, confirm the span distance of the 2 mounting screws remains at 10mm center-to-center.
The author marked this model as their own original creation.