Food Bag Dryer

If you are using reusable bags for food/veggies this stand will be very useful to dry these bags after washing them.

I always had an issue to dry them after washing where i was looking at using a glass to keep them open so they dry up.

This little stand permits you to hang the bag while keeping it open to let it dry.

The 3mf file is the model cut in half with a dowel attachment to get the piece together. This was done to prevent using supports.  You can always use the STL file which is the full length 1 piece but you will need supports.

Printing:

• Filament: PLA
• Infill: 15-20%
• Nozzle: 0.2mm
• No supports required on the cut version (3mf).  You will need supports if you are using the single piece STL.