Venice - Venezia - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Blue 
PLA+ Sunlu Grey 
PLA+ Sunlu Orange 
PLA+ Sunlu White 

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue
At layer #15 (1.28mm) swap to Grey
At layer #16 (1.36mm) swap to Orange
At layer #21 (1.76mm) swap to White for the rest.