This is a simple design for holding a Godox Xpro wireless flash trigger for those times you are using your 5x4 in the studio. It should also work with any flash that has a hot shoe mount. If you do use a Godox trigger I would recommend mounting it to the right of the camera so you can still access the buttons.
Easy to install and does not require modifying the camera in anyway.
Some hardware is required.
2 x M4 threaded inserts (4mm depth)
2 x M4 10mm bolts and washers
1 x Cold shoe adapter (available on eBay and Amazon)
1 x ¼"/20 counter sunk bolt 10mm
The pictures should give you a good idea how to assemble and the superglue is to stick the trigger holder to the top plate.
Printing material:
I used PLA+ but you can use whatever floats your boat.
The author marked this model as their own original creation.