Ferrari Leggend F1 - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Grey 
PLA+ Sunlu Silver 
PLA+ Sunlu White 

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #17 (1.44mm) swap to Silver
At layer #20 (1.68mm) swap to White for the rest.