Endoscope to microscope adapter for the Aldi Maginon mk-800sh

Description
This model is free and took a lot of work to create.
If you appreciate this model, please leave a download and a like!
If you print this model, please post a make.

With this 3D-printed adapter, you can easily attach an endoscope with a 3.7mm camera diameter to the eyepiece. The model even has a handy arrow to show you which way is up, so your camera lines up perfectly with the microscope’s optics. For an even snugger fit, a bit of tape around the body tube works wonders.

Make sure to print the adapter at a 0.15mm layer height for the best results. And if your endoscope isn’t exactly 3.7mm, no worries—you can tweak the size in PrusaSlicer since it uses modifiers. Simple, cheap, and effective!