English description (German description below)
Stand for squared timber
- The dimensions of the squared timber are 24x48mm.
- Two versions available: High (55mm mounting) and Low (40mm mounting).
- The bottom of the low version is open, in the high version it is closed.
- Diameter of stand is 100mm.
- Drill hole size fits M5 screws (high version) and 4.089 THRU (low version).
- I have used M5x40 screws
- The screw connection and the height of the socket can compensate for surface unevenness (depending on how far the square timber is inserted into the socket).
Print information
- Printed with PETG
- Layer height 0.2mm
- Infill 40% grid, but can be adjusted
Have fun !
Deutsche Beschreibung
Standbein / Standfuß für Kant- oder Konstruktionshölzer
- Die Abmessung des Kantholzes beträgt 24x48mm.
- Zwei Versionen verfügbar: Hohe Fassung (55mm) und niedrige Fassung (40mm).
- In der niedrigen Version ist der Boden der Führung offen, in der hohen Version geschlossen.
- Durchmesser des Standfußes ist 100mm.
- Bohrlöcher passend für M5 Maschinenschrauben (hohe Version) bzw. 4.089 THRU (niedrige Version).
- Ich habe M5x40 Maschinenschrauben benutzt
- Durch die Höhe der Fassung und die Verschraubung können Unebenheiten des Bodens ausgeglichen werden, falls notwendig (je nachdem wie weit das Konstruktionsholz in die Fassung geschoben wird).
Druckinformationen
- Gedruckt wurde mit PETG
- Schichthöhe betrug 0.2mm
- Infill 40% Grid, kann aber je nach Bedarf angepasst werden.
Vielleicht habt ihr Verwendung dafür. Viel Spaß !
The author marked this model as their own original creation.