M142 HIMARS

1:42 scale, just like my other vehicles. This design has a lot of parts, but don't be scared, it's not hard to assemble. The chassis should be printed first, and then everything else goes onto the chassis. The wheels should be attached to the axles I designed, and then placed on the chassis. The cab should be pre-assembled with the mirrors, and then added to the chassis, along with the base for the launcher. Quick note, the launcher swivel needs to be printed on its side and then glued to the chassis. The rest of the assembly is straightforward.

A paperclip is needed to serve as the axle for the launcher. Unfold the paperclip, and then slide in into the hinges, and fold the edges to stop it from moving out. The launcher stand should slot into the pin on the side of the launcher base, and it can fold up or down to hold to support the launcher itself. While the GMLRS doesn't technically have to be glued on, I recommend doing so unless you want the rocket pod to be easy to swap out for an ATACMS, however I didn't model an ATACMS and I don't plan to.

So yeah, that's it. Leave a comment if you have a question.