Dual 5015 Fan Duct Quadro SV06/Plus

**THIS IS STILL IN BETA, MORE TESTING NEEDED, DO THIS AT YOUR OWN RISK**

**For the non plus SV06, you need to have the SV06+ Hotend or the Duct won't work**

For SV06+ it should work fine without modification

At least use PETG, ABS or better Recommended
 

Enable support, but use support blocker for the Duct as shown in picture 4-6, the fan adapter won't need support blocker unless it generate support in areas other than whats shown in picture 7 and 8

Wire up the 2x 5015 fan in parallel

Hardware needed:

For SV06 Plus:

4x M3x25 Countersunk

2x M3x20 Countersunk

2x M3 Any length from 5-20mm should work (For connecting the Fan Adapter to the Duct)

2x 5015 Blower type Fan

1x JST 1.25mm 2-Pin (if not already on the fan)

For SV06:

6x M3x20 Countersunk

2x M3 Any length from 5-20mm should work (For connecting the Fan Adapter to the Duct)

2x 5015 Blower type Fan

1x JST 1.25mm 2-Pin (if not already on the fan)

Remixed to fit the regular SV06/Plus version