Gaggia Classic Pro Steam Wand Drain

Drain into the drip tray for water dripping from the wand of the Gaggia Classic Pro 2024 model.
10
16
0
179
updated November 24, 2024

Description

PDF

Inspired by the drain of Waxall, I tried to have the fixation optimized and ended up with a couple of changes. 

The model consists of two parts, which need to be glued together with CA glue. Additionally the magnets (3 magnets 10 mm x 5 mm x 2 mm) need to be glued into the grooves. 

I used PETG in order to have a drain, which can bear hot water from the drain. (I struggled with glueing ASA and decided to go for PETG.)  

Small support necessary for the notch in the drain part. 

Everything else can be printed with standard settings. 

 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Fixation with magnets using the cutout of the sheet metal housing for positioning. 3 magnets: 10 mm x 5 mm x 2 mm, left over from the Gagguino mod. 

The curve of the drain follows the radius of the wand up to a certain angle. 

Water from the wand drips through the second hole in the first row of the original drip tray plate. 

License


Highlighted models from creator

View more