Christmas Tree (vase mode) and star

Christmas tree with separately printed star.

The Christmas tree is designed to be printed in Vase mode (to save on material and to allow for lights to be fitted inside/outside

I used semi translucent PETG for the tree itself, so that you can have some of the light from the fairy lights shine through the tree.

The star can be printed with PLA or similar and then glue it to the tree (it has a cutout made for it).

Tree: 

• 0.2mm layer height
• PETG (or other translucent filament)
• no supports
• Vase mode (spiralised contour)

Star:

• 0.2mm layer height
• PLA+ or similar
• with supports 
• with brims (as it's printed standing up)