MeArm 0.4 Printable (.stl)

This is a printable version of the MeArm 0.4 drawings.

This is a derivative of:
http://www.thingiverse.com/thing:360108

It was originally for laser cut 3mm Acrylic but these files will 3D print a 3mm ABS/PLA version happily.

PLEASE LOOK AT INSTRUCTIONS ON WHICH FILES TO DOWNLOAD.

My original Blender source file is included for download. If you need additional file formats please leave a comment asking for it.

Print instructions

Category: Robotics Instructions

see http://www.thingiverse.com/thing:360108 on how to build.

You have the option of downloading:

• each part type individually (some parts need to be printed more than once)

• each part inside one zip file

• all the parts as one giant stl file (every part needed is represented)

• all the needed parts as 7 different stl files (that fit on the UP! Mini build plate)

• the original .blend file I used and exporting your own configuration of stl files (or modifying the shapes).
  Note if downloading each part, some need to be printed more than once.

  Please note that in the 7 files that are the plates, 7of7 includes a modified base plate to allow it to print on an UP! Mini. The original plate is found in the other downloads.

  Note the following due to prining MeArm, not laser-cutting:

  The tolerances are quite tight. So print on the finest and most accurate setting possible. (Works well with 200 micron on UP! Mini with "fine" setting in driving software).

  In the current drawings which were imported from the DXF, some of the 3mm holes aren't quite big enough. A 3mm drill will fix them.