not-a-Wago and 3010 fan mount for Fysetc CNC bed frame (Voron 0)

A way to mount 3 AliExpress knockoff Wago's, a 3010 bed fan, and some MicroFit 3.0 connectors. And some optional cable management.

The design is not an actual remix but inspired by Driftrotor's work (see remix section). Technically it should be possible to combine parts from both designs to fit your situation, should you need two 3010 fans or rather use actual Wago's.

Print the file bed_mount_unibody.stl if you want a single-piece mount with built-in zip tie mounts. Print not-a-wago_bed_mount.stl, bed_fan_mount.stl and cable_guide.stl if you don't need the zipties or want to combine parts.

The file drill_template.stl is meant in case you have one of the early models of the Fysetc CNC bed frame, which does not include the mounting holes needed. Tape this template to the frame and carefully drill two 3.5mm holes, preferably with a drill press or other way to ensure that you drill as straight as possible.

My model is 100% my own work but also 100% inspired by Driftrotor's design. I took his idea and recreated it to fit my specific situation.