Magnetic Name Tag(Default name:Tommy)

onshape model
Please download here as well so I get credit prusameter even though it's mostly through onshape

Instructions: 
1) open onshape model and make a copy of the workspace
2) open the “name” part studio
     a) double click on the surface text 
     b) change “Tommy” to your desired name
     c) hit the green checkmark
3) open “body” part studio
     a) double click on the surface text 
     b) change “Tommy” to your desired name
     c) hit the green checkmark
4) export the name and body part studios as your preferred file type (.stl, .3mf, etc)
5) Import to slicer
6) Center the name.stl and body.stl on each other face down(magnet anywhere
7) double check to make sure the two are lined up(with multiple filaments)
8) print (does not matter too much but my settings are below)
9) super glue 10mm diameter x 2mm thick magnets to slots in pieces (amazon.com)
     a) MAKE SURE THEY ARE THE CORRECT ORIENTATIONS ( they will push eash other apart otherwise)
10(Optional)) Upload your remixes so other people do not have do change the name in onshape

Print Settings
Infill: 15% Gyroid
.2mm Layer height
No supports
3mm Brim

Filament:
Black Overture Standard PLA
Comgrow Orange PLA