[2x REMIXED] Tevo Tarantula 3-Wheel X Brackets

This is the "without spacers" version of https://www.thingiverse.com/thing:2628544

The spacers came with tevo printer is strong enough to handle preasure but printed ones are not. So i recommend using default spacers.

-You will need 4 pieces m4 30 screws + 4 pieces m4 nut for tensioner. -Because the original part is not designed well, drilling tensioner holes with 4mm drill bit is needed. -And you should use washers.

Warning- While mounting wheel on the tensioner you must use extra spring washer between screw head and wheel. Because default tevo wheel screw hits extrusion.

X idler and motor mount: https://www.thingiverse.com/thing:1580899

Print Settings

Printer:

Tevo Tarantula

Rafts:

No

Resolution:

%30

Notes: