Raspberry Pi 3 (B/B+) Easy Access GPIO Case

The main purpose of this remix is to implement a more accessible GPIO pin section design to the original case.

The original design has no easy access to GPIO pins. Pins are hardly reachable, and it is difficult to see what pin you are dealing with. To solve these problems, I redesigned the case. Now, it is much easier to use GPIO pins.

What would you need:

• 4x 15mm or 20mm m3 screw (to mount upper and bottom half of the case)
• 4x 5mm m2.5 screw (to mount Raspberry Pi)

The GPIO pin section is redesigned so that it is easier to use.