Scania logo - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 136x136mm and 170x170 in size

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Blue 
PLA+ Sunlu White 
PLA+ Sunlu Red 
PLA+ Sunlu Yellow 

This print uses 5 unique filaments

Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #13 (1.12mm) swap to White
At layer #14 (1.2mm) swap to Red
At layer #23 (1.92mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.