PiCam Arm Extrusion Twist-Mount

This is a rather quick modification to the original creator's 2020 extrusion model that introduces a twist-tab style mounting system that eliminates the need to disassemble your printer to insert the mounting nuts.

Recommended Settings (MK3S/+):

Print Setting: Detail

Filament used: Hatchbox PLA Pro+ (or any other PLA+/ABS)

Keep the part on its side when slicing. Recommend using supports on the twist tab area.

35-45% gyroid infill

Instead of mounting the arm to the printers metal extrusions with nuts/fasteners, simply just twist it in instead! This eliminates the need to partially disassemble your printer to insert the mounting nuts into the 2020 extrusions.