Wireless Charging Shelf - Desktop Edition (v0.9 Beta)

This is a rough remix of Popandsicle's Wireless Charging Shelf, so check out his model!

Key points I wanted to improve on with the original idea:

• I wanted it to be a desktop accessory
  • Added 4 recesses for some rubber feet
  • Removed the shelf mount and made it flat
• The opening for the USB-C end fits perfectly, and although the bigger channel saved on some filament, it made it harder to hit the sweet spot for feeding through the cable.
  • Shrunk down the cable channel
  • Widened and remade the opening for easier feeding through

Which version do I need to print?:

Your print bed size is below 27.5cm:

• print the upright version
• It features a flat backside (similar to the original model)
• print it with on a 45° angle (From XY=0 to XY=225)

Your print bed size is above 27.5cm:

• Pretty rare but leads to a better result
• Backside has the same look as the others
• The model is 274.9mm long so double check!

Print Settings:

Changelog:

v0.9 (17.11.24):

• Added some pretty text
• Beta Release!

v0.85 (17.11.24):

• Testing of the model 

v0.5 (14.11.24):

• Found Popansickle's model and fell in love with it
• Remodeled and designed out a rough scetch for a desktop version
• Test printing it

Remixed the original by changing it from a shelf to a desktop accessory. Reworked the feed through section for the cable and made the opening bigger to get the cable through easier.