Adult Size Manacles and Leg Irons

Shackles and chains. Two sizes for Halloween costume; prisoner, thief, zombie, slave or similar.

The handcuffs have hinges and snap closed with click. Print one closure clip for each shackle, and two closure clips for each Leg iron. Print-in-place design (cuffs and chain separately). The chain prints flat with only short bridging. 

Printing

Intended to be printed with 0.4mm nozzle and .2mm layer height so that the gaps work out correctly. There are two versions of each model, one with “tabs” in critical places in case you have trouble getting it to stick. The chain may require a sharp knife to separate the links. 

Settings

• 0.4mm nozzle

• 0.2mm layer height

• No supports

• 3 perimeters

• 3-4 bottom / top layers

• 15% infill

• 5mm brim recommended for “closure clips” only

Find child size here:

If you're looking for a nicer chain, check out this model:

Checkout my realistic version:

This is the painted with a faux rust finish on a more realistic version.

Larger size adjusted to preserve the print-in-place gaps needed.
Added extra closure clip hole.