Keystone Recessed Ceiling Jack

This is a recessed keystone jack.  It is pressfit into a 1" (~25mm hole) but is tapered so no need to be perfect.  I ran cat 6 to the jack and then placed a keystone ethernet into it.  I used a ziptie under the tab of the keystone to “lock it in” and prevent it from backing out.  If press fit doesn't work, there are screw holes around the perimeter. 

From there, I used a 6" ultra thin ethernet to go between the jack and my ceiling mount APs.

https://www.amazon.com/dp/B07957S8V6?th=1

Printed with 0.2mm heights, no supports.