Christmas cookie cutter set

Super foremki. Żona zadowolona

I have printed a snowflake and it is very lovely cookie shape. Taking it apart is a bit difficult, so maybe a small handle would help. But overall, we liked it and some friends even said that cookies are too cute to eat

Thanks to the author for these cute molds, the design of the pictures is super👍 Printing and using them I found shortcomings that did not allow me to fully enjoy the process. 1. The cutter is not long enough, I would increase its cutting part by 2-4 millimeters and add a bevel on the outside at 45 degrees for more convenient separation of the dough. 2. The frame that reinforces the shape of the cutter is too thick, it can be shortened by 2 mm and also add a chamfer so that when cutting the molds do not rest against each other but move apart. 3. The stamp shape. Chamfers are needed at the top and bottom on the part that gives the pattern for better separation. 4. The height of the stamp pattern needs to be increased by 2 mm. 5. The stamp itself is much smaller than the form, too much distance. 6. The part that gives hardness to the stamp can be reduced by 2 mm it will not become worse from this, holes are also needed for better printing of the pattern in the base of the stamp. If needed I can send a modified model as an example. It is better to PRINT with a layer of 0.1-0.8 so that the dough does not get clogged between the layers. (edited)

Am I missing something obvious here? These each come in two parts. Are they supposed to be glued together? Are you supposed to cut it with the one part and then place the other on top to make the imprint?