Christmas Lantern for LED tealight

A Christmas lantern that radiates the warm glow and cozy spirit of the holiday season. This lantern creates a magical ambiance, whether placed on a windowsill, hung on a porch, or used as a centerpiece for a holiday table.

The bottom part of the lantern can be printed without supports but for the stars at the top support is recommended. For the top part supports are neccessary.

The patterns should be printed in white and a dark color. The white part of the patterns are 0.4mm thick and the dark part is 0.8mm thick so you can print it with an automated filament switch or you can swap the filament at these layer heights. There are 6 patterns in total to choose from. 

Both main lantern parts are a tight fit, so you can press the top part on the bottom and it should hold together pretty good. This allows you to turn the LED light on and off, by removing the top part. 

If you have any suggestions to improve the quality of this design feel free to contact me.