Geometric Sculpture #14

Object description:

Geometric sculpture no. 14.

Print the parts in the suggested direction. If required, paint on support is already defined.

The parts can be simply plugged together. Glue is not required but can be used.

Hint:

Although otherwise commented in the downloads, the complete sculpture can be printed in one piece using brim and supports on the chamfers. To do this, place the model on three tips.

Number of parts to be printed:

3x Sculpture-#14-part01

3x Sculpture-#14-part02

Links to the other sculptures of this series:

Geometric Sculpture #01:		Link
Geometric Sculpture #02:		Link
Geometric Sculpture #03:		Link
Geometric Sculpture #04:		Link
Geometric Sculpture #05:		Link
Geometric Sculpture #06:		Link
Geometric Sculpture #07:		Link
Geometric Sculpture #08:		Link
Geometric Sculpture #09:		Link
Geometric Sculpture #10:		Link
Geometric Sculpture #11:		Link
Geometric Sculpture #12:		Link
Geometric Sculpture #13:		Link
Geometric Sculpture #15:		Link
more will follow…		…

Recommended print settings:

Material:  PLA, ASA/ABS, PETG.

Resolution: 0,2mm

Infill: 5%

Perimeter: 2

Support: already included where required