Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 80x85.39mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Silver Transmission Distance: 3.2
PLA White Transmission Distance: 5
PLA Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Silver
At layer #8 (0.72mm) swap to Jade White
At layer #12 (1.04mm) swap to Black
At layer #16 (1.36mm) swap to Red for the rest.