Elegant Dancing Tap

@Miloske model was beautiful just feels great in the hand had to use it as a Beer Tap handle. 

I'm also sharing how i did this. It might inspire others.

Quite an easy remake, here are the modification:

• Cut a portion of the lower model to reduce the base width
• Added a 1 inch Screw hole at the bottom to screw the Beer Tap
• Screw size is regular 3/8

There was so many triangles in the STL, it permit me to figure a way to work without transforming to F360 Native. I test the opposit…

1- Imported the STL from Miloske and fit to size

2- Split the mesh removing 1 inch from bottom.

3- Designed the screw part in F360 and save as Mesh and negative merge with the STL

Export and Slice.

In the slicer, i slow the speed and add a brim to solodify the adherence to the build plate. This help me prevent model vibration at the top delicate part. The model is a about 9 inch tall.

Hope this help, I can now easily modify Mesh. 

• Cut a portion of the lower model to reduce the width
• Added a 1 inch Screw hole at the bottom to screw the Beer Tap
• Screw size is regular 3/8