Protective sleeve for Uwell Nunchaku (V1)

The buttons of Uwell's Nunchaku V1 are very exposed, so they are easily activated by accident.
And as its KeyLock feature is terribly unreliable, it very often gets set to maximum power, burning the cotton in the coil.
With this sleeve, the buttons are recessed, thus less likely to be pressed accidentally.
There is a blank version and one that comes with the logo of the "Dampf-Piraten" board.

Samples printed with 0.2mm Layer height.
Tree supports are recommended for the button holes.
Filament usage: 5.1m (~15g for PETG)

The USB-port is covered intentionally: Charge your batteries in a dedicated charger - especially on this device, as it becomes quite hot during the charging process. Batteries don't like being cooked.

Version 02: Increased chamfer sizes to make buttons more accessible.

For testing: It seems that some devices have their max. diameter about 15mm above the upper edge of the setting buttons (mine has it at 10mm). The models named with “TEST….@15mm” are aimed to fit these devices.

License: The versions without the logo are allowed to be remixed (conforming to CC BY-NC-SA 4.0).
As additional copyright policies apply to the logo, the versions with the logo are not allowed to be remixed (CC BY-NC-ND 4.0, as stated). You can use and/or modify it for personal use, but you are not allowed to publish/redistribute it.