Ender 3 Pro Stealthburner + Klicky PCB D2HW

I wanted to revive my old Ender 3 Pro with some mods i liked. I used parts i had laying around. So i mixed a few design togheter in cad.
Warning, i modded my Y axis frame to be 20mm more to the front, this can be done by using the stockbolts on 2 mounts, and 2 bolts moved forward with m5 hammernuts, mounting the frame again sturdy like it should!

Parts used:

Klipper firmware!
Klicky PCB kit, type d2hw (the one with the softswitch)
BTT SKR mini e3 v3
i used a BTT pi i had laying around, but you can use any klipper compatible host.
Original stealthburner files used by the voron team (you can find it on their github)
My modded stealthburner mount
My modded klickypcb files.
M3 bolts in different form factors!

→ I used the voron short m3 heatinserts to assemble everything, look at the picture i added, red circles = heat insert needed.
→ Change magnet orientation for the klicky pcb like in the picture i uploaded, our ender 3 pro moves sideways over the klicky pcb, instead of straight from the frontside!

→ i'll add my config files + used macro's, Check them out for your own distances and tollerances, especially the klacky macro's probe dock macro's! Every printer is different, and mine is a very old version of the Ender 3 Pro!
i'm not responsible for any damage caused by this.

All credits go to the original designers for their hard work, i just modified them to my own needs.
Thanks to Schlonky (@SchlongkyDong) for the modified Stealthburner mount.
Thanks to hawk16zz and adamstorm, all the boys on the discordgroup of kevinakasam designs, for the help on the klackender design to adapt this to klickypcb!
Thanks to Kevinakasam himself, for all the nice designs he makes for our old beloved Ender 3 Printers! 

Original model comes from here:
https://github.com/hawk16zz/KlackEnder-Probe_x_PCB_Klicky

KevinAKAsam's Belted Z mod.
https://kevinakasam.com/belt-driven-ender-3/

boothyboothy X cablebox:
https://www.printables.com/model/169200-ender-motor-cable-extension-junction-box

I change the offset of the stealthburner mount to maximize build volume when using klackypcb, on the X Axis.

I modded Hawks Klackypcb to be compatible with my parts, the original one cracked a few times in combo with my design.