Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 80x85.39mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 1.8mm

Filaments Used:
PLA Grey Transmission Distance: 8
PLA Black Transmission Distance: 0.3
PLA Red Transmission Distance: 4
PLA White Transmission Distance: 5
 

Swap Instructions:
Start with Grey
At layer #4 (0.4mm) swap to Black
At layer #6 (0.56mm) swap to Red
At layer #10 (0.88mm) swap to Black
At layer #11 (0.96mm) swap to White for the rest.