SV07 Motor Brackets/Mounts

Updates:

1. Reduced part height by 7 mm. Now the bracket is at the same height as the original.
2. Added version 2 of the model where I added some minor features from the original model (eg. the tabs that holds to the extrusion).
3. Fixed fastener location issues.

============================================================

Why?

Possibly due to injection molding, the original motor mounts can be slightly tilted (the base and wall are not in 90 degrees angle) and making the lead screw to tilt.

3D print your own mount to have a straight mount

Print Settings

Layer Height: 0.15

Perimeters/Wall loops: 5

Top & bottom layers: 5

Infill: 30%

Infill Patten: Cubic

Support: No support