Python AMS Riser/Stand

I have always used a Riser on my P1P - now P1S - to make room for the bowden tube and free up usable space under the second AMS. when I converted to the Python I wanted the same basic setup, so I came up with this so the Python won't slide off the top of the printer and to lift the second one to make room underneath it.

the black and green lid riser is this one from printables: (this is optional)

https://www.printables.com/model/590931-bambu-p1-and-x1-sliding-vents-glass-top-led-enclos

the others are of my own design. both risers attach directly to the bottom of the python frame-work using M5 x 15 or M5 x 20 screw and nuts. (I don't remember the length for sure)

Note - I have only printed these things once and they turned out pretty good. I printed them on my P1S with the 45-degree side down on the print bed and no supports. the Risers do work with my cover plate, but they will not work with the Python enclosure.

I also added the Step files if anyone wants to tinker with it.