Cybertruck Custom Rack Mount

Converts the rail attachment studs into a 14-2 threaded socket.
5
35
0
256
updated December 28, 2024

Description

PDF

This is a fixture that can be connected to the eight rack connections points so roof racks can be installed and removed more easily.  Does not interfere with the flip covers. This must be printed in metal.  No FDM plastic part will be strong enough to ensure your rack and contents stay secure.  I printed it in 316 Stainless for $30 each.  Thread is 14-2 and you will have to chase the threads with a tap once they return from the 3d printing service.

I have been very happy with a speed and price of in3dtec.com.  They will complain about a design rule  issue around the threads.  I just waived it since I knew I was going to have the chase the threads with a tap anyway.

Note:  You must use washers or spacers of some sort when attaching your rack since the tops of these sit below the cover.  Otherwise you may distort the truck frame as you torque down on the 14-2 bolt.

 

Tags



Model origin

The author marked this model as their own original creation.

License