Omnifixo - Field Box with divider

This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. 

This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure dividers/inserts or to place the base vertically if you have jobs that needs some extra reach.

Additionally this remix:

• Moves some features to gain a few extra mm of space, the included divider uses that space, but the original one will still fit
• The magnet holding tabs don't have overhangs in this version - no supports needed for printing
• Various sharp edges were softened to make it more pleasant to handle
• Bottom has a chamfer to aid in printing without the “elephant's foot”
• Added a large number of small features that make the model less brittle, as the orgiginal wasn't desgined for 3D-printing

The divider is included as a separate part.

You can view the CAD file on Onshape: https://cad.onshape.com/documents/f942303e6050c11a2dfef4f6/w/aac4225742dd317f117359c9/e/fede2b6e2e640c2dbe5d727f?renderMode=0&uiState=6738237660d000766f7f2146

Printing

• Everything prints without supports
• 0.2mm layer height
• 0.4mm nozzle
• Mouse ears are recommended for the divider

A remix that:
- Improves strength of the printed box
- No need for supports when printing
- Simple divider as a separate