Fujifilm X-E4 Grip + battery/SD card door access

A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw.

Thanks to the maker of the original model that enabled this remix.

I printed it in black matte PLA (use a lot of infill around the battery access area for extra strength). The battery door opens without a problem and you can swap batteries and SD cards without removing the grip.

I have included two print files/variations. One is a smooth grip with 50% infill throughout. The other is my favorite, 20% infill for the main part, with 70% infill for the area around the battery access window, with an added “fuzzy surface” area for the grip.

This remix includes a modification to the baseplate to provide access to the battery door / SD card. The bottom has also been slightly modified to be a little heftier on the sides since there is an access port in it and I wanted to maintain as much sturdiness as possible.