Turning Table / Caroussel Ø 15 cm with bearing balls

Put anything on it you want to turn around.


Printing
I printed with PLA+, layer height 0.2 mm, on a smooth build plate.


Assembly
Place the Separator on top of the Base Plate.
Place eight bearing balls in the groove of the Base Plate.,
Place the Top Plate on top of the Separator.
Screw the Center Bolt in the center of the Base Plate. Secure with Center Nut.
Place the Cap in the Top Plate.
Screw the Feet into the Base Plate (optional).


Metal Parts
Use eight Ø 9 mm steel bearing balls.