E-Switch RA1 Housing

Housing for an E-Switch RA1 panel mount toggle. Pictured with the RA17131123 but should work with any of them. It should be easy to adjust the mount hole dimensions for other switches in the source files.

Provides strain relief, access to remove the switch if desired, and something to zip tie mount. I made this because I couldn't find any inline lamp-style cord switches rated for sufficient current.

USE WITH INSULATED SLEEVES ON YOUR WIRE TERMINALS! Otherwise someone sticking their fingers in there may shock themselves. I also recommend locking terminals so they can't pull loose. As always, know your local code and use appropriately rated parts and materials.

Print it flat side down, no supports needed.