AsteraBox ART7 Wifi Wall Enclosure with PSU

This Enclosure fitts an AsteraBox (ART7) Wifi, a 5V Powersuply and two neutrik connectors. The Enclosure keeps all buttons accessible.

Partslist:

• 12x Heat set insert M3
• 10x  M3x10 countersink screw
• 2x M3x6 Screw
• 2x  countersink  woodscrew (for Wallmouting)
• Meanwell APV-16-5 PSU (5V 2,6A)
• Neutrik Powercon or True1 Input socket
• Neutrik XLR 3pin oder 5-pin male socket
• 2x Flat Crimp connector for Powercon socket
• Shrink-wrap tubing

Disclaimer: Wiring the PSU and Socets involves working with hazardous voltages! Electricity can cause injuries, Fires and Death! Don't replicate my work, if your not certified to work on electronics! I don't take any responsibilitys for your actions and resulting injuries! 

Printing:

• Needs no supports
• Printed in Prusament PC-Blend CF
• Printed on Prusa MK4 with 0.2mm speed profile. I increased the wall thickness to 5, and the infill to 15% Gyroid, because the enclosure is mounted in a high trafic area on stage. You pobably don't need ist that beefy.