F/A-18E Super Hornet Aircraft Kit Card with Compliant Folding Wings

Unleash the thrill of modern naval aviation with this 1:265 scale model of the F/A-18E Super Hornet! Known for its advanced avionics, precision strike capabilities, and versatility as a carrier-based fighter, this model of the F/A-18E also features folding wings for compact storage.

The F/A-18F is my friend's favorite aircraft, so I felt I had to try my hand at it and all the variants!

Included are parts for non-folding wings and/or no landing gear (as some of you have requested that in the past).

To fold the wings, slowly apply pressure to fold the wings up. they will make a small snap sound as you create this hinge, but don't worry! it will not snap unless you fold it downward (I have only tested this with a couple different brands of PLA, I don't know about other filaments).

To insert the vertical tails, rather than inserting the bottom into the slot in the main wing, I have found it easiest to start the top of the vertical tail through the slot from the bottom of the main wing, and use a flat surface to push the tail up through the main wing slot.

Best of luck! I always love to see makes and get feedback on the models!

Recommended layer height: 0.2 mm

print all the variants!

F/A-18E Model

F/A-18F Model

EA-18G Model