Bath & Body Works 3-wick candle shelves

Shelves for 3-wick candles from Bath & Body Works.

Features:

• Structurally sound, easily stackable
• Cutouts on sides for fingers to easily reach around sides
• Groove in the base for the candle to slide in/out

Note: No built-in connectors -- this is partly to conserve space, and partly because I'm still learning.

Instead, I sized mine precisely to fit 3x3 into my 336mm square Ikea Kallax shelving (see pics), aka 112mm square candle holders. I plan to use either putty or glue to reduce the (already minimal) shifting during use.

The scad file (included) should be usable to make the holders wider and/or taller. (It's already nearly as small as it can go.)

Tested print settings: 0.6mm nozzle, gyroid 25% infill, no support needed

Includes scad, stl, + 3mf build file.