USB-C portable adjustable PSU DSP5005 (Print in Place Case)

This model simply makes the OG body printable in place, and adds ventilation holes.

Click HERE to download the new model, which features a completely re-designed leg system, adds features and fixes issues + is now is completely print in place, with no fasteners/inserts required.

/////

Main changes:

1. Removed 2mm brim on face, which ensures a lovely front-facing layer.
2. Added "point" to side bolt holes.
3. Added ventilation slots on “top” (small 2mm overhangs, but easily bridged).
4. Added 45 degree slope to “back” insert holders.

Update 21/11/24 - increased banana plug socket holes from 4.2mm → 6.2mm, as the recommended sockets don't fit in the original 4.2mm holes. 

Please find the STEP file included if you want to make any other changes - chur!

STL should load into your slicer in the correct orientation.

https://www.aliexpress.com/item/1005005603788873.html

1. Removed 2mm brim on face, which ensures a lovely front-facing layer.
2. Added "point" to side bolt holes.
3. Added ventilation slots on “top” (small 2mm overhangs, but easily bridged).
4. Added 45 degree slope to “back” insert holders.

Update 21/11/24 - increased banana plug socket holes from 4.2mm → 6.2mm, as the recommended sockets don't fit in the original 4.2mm holes.