Wooden Train (Brio Compatible) Watering Tower

Do your Brio/Ikea/Wooden Trains need to load up on water before their next run? Now they can.

This model is compatible with all of the normal wooden train brands. 

Instructions:

1. Simply print all four of the pieces. Unfortunately the pillar piece does require supports and is most easily printed upside down. 
2. Use a bit of CA glue to attach the base, pillars, and tank together.
3. Cut a 10mm long piece of 1.75mm filament to act as a hinge pin. 
4. Use the pin to secure the spout. A drop of glue can be used to secure the pin. Just be sure not to glue the spout in place.

If you like this model check out this collection of my other toy train models.