Razer Kiyo Lens Hood Press Fit
Problem: Kiyo's ring light makes the image look blown out and white.
Solution: A simple 40mm OD scale to fit lens hood
0
9
0
36
updated December 7, 2024
Description
PDFEdit: V2 has 1% oversize built into the model, V1 does not.
Everybody's printers are tuned slightly differently - I scaled my model in the slicer to 101% and it press fit just right. YMMV
Problem: Kiyo's ring light makes the image look blown out and white.
Solution: A simple 40mm OD scale to fit lens hood
Recommended print settings:
PLA, 0.2mm layer height, 4mm brim
Model origin
The author marked this model as their own original creation.
