Volvo S40 V50 C30 Diesel Exhaust Pressure Sensor Bracket

If you find my designs useful, please consider sending a tip

UPDATE June 2025: Added an updated v2 of each bracket which fits better against the battery cover, raised the sensor screw hole as it was pullng the snsor forward a bit and made it all a bit thicker to hopefully help stop warping.

I replaced a faulty Diesel Exhaust Pressure Sensor on my 2010 Volvo S40 2.0L Diesel but the orientation of the sensor input/outputs was different to the original sensor, making the new sensor's mounting screw in a different orientation, so wouldn't attach to the battery box as before.

Created this to allow the sensor to be held in place rather than just wobble around freely.

I would recommend the longer bracket if your battery box has the extra screw to hold it, otherwise a short version has also been included.

Will likely fit the V50 and C30 as well as other similar models.

Print Settings

Printer Brand: Creality
Printer:  Ender 3 Pro
Rafts: No
Supports: No
Brim: Yes (Personal Preference)
Resolution/Quality: 0.2
Infill: 40
Filament: CopyMaster PLA Black 
 

Category: Automotive