Holder for callipers - v2.0
Honey comb holder for callipers little more depth (to larger callipers) and thickness on support
8
21
0
107
updated November 11, 2024
Description
PDFImproved caliper holder.
Note:
My print on the image is not so good. I changed the slicer and I'm still configuring it.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added 1mm to the thickness of the supports so if can hold heavier calipers.
Added 3 mm to the depth of the holder to support thicker calipers.
Added 1,5 mm to the width so it can be easier to move the caliper.
Also added 2,5 mm space between the honeycomb holder and the base, so it can be used on top of honeycomb connectors.
