Seeed Studio SenseCap T1000-E Case Multiple Styles

2025/02/03 Added STEP file

A collection of cases, frames or holders for the Seeed Studio SenseCap T1000-E.

Any ideas welcome, please add your suggestion in the comments.

Printing info (I use Orca Slicer 2.2.0):

• up right
• no supports needed if adequate cooling
• 0.1-0.2mm should be fine
• scarf seams
• (optional) manually paint seams on the back
• Dimafix or PVA glue for best bed adhesion

For best results print slow, <50mm/s.