My entry to de 2024 3D Printing Industry Awards - Trophy Design Competition

1. Ok so first put the lid to the base on the base
2. Then put small filaments pises in the 6 holes approximately 5 mm long
3. Then put the little feet into the small holes with melted filalment sumps make sure they are facing the right way so you can see in the pictures
4. So take the sign with the letters put some filament on the back as you can see in the pictures then melt it and while it is still warm put the big nozzel on top
5. and put the nozzle on top and enjoy

what if the nozzle doesn't fit on 
de top of the three humans handsmelt their feet and adjust them accordingly