Printed with PETG 100%infill, without support and brim.
Be careful not to cut yourself!!
Be careful not to cut the printer BED with it!
When holder is printed, you take one blade of universal Olfa knife and put the sharpest side to the table and on the top you put Blade Holder. And press with some wood on the top that the blade gets into the hole.
When something tiny or small is stuck to the bed you gently put plastic part of Remover to the bed, blade near the printed part and you have the right Angle to smoothly remove the print. You can circle all around the print with the remover.
The author marked this model as their own original creation.