K1 Max hinges with bearings

 I designed these to take 625zz bearings and bolt together with m5 capscrews to eliminate sagging

bom.

 1 top_side, 1 top_door, with or without magnets

1 bottom_side, 1 bottom_door, with or without magnets

2 door_nut_trap

4 x m3x8 capscrews

4x m3x16 capscrews

4x m3 hex nut

4x 625 bearings

4x m5x20 capscrews

4x m5 hex nut

4x m5x14x1.2 washer

4x m5x10x1 washer

6x 6x2.7 magnets, they are supposed to me 6x3 magnets but they measure at 2.7

you need to keep the 4 rubber grommets that go through the glass door as they are reused

fabric tape optional

step file added to adjust model to your specific needs