Bambu X1C mount for IKEA Alex

The X1C's feet didn't sit securely on top of my Alex cabinet as it was slightly too narrow (about 6mm). This mount solves this problem by extending the width of the cabinet so that the feet are firmly supported, making it harder to accidentally knock over the printer.

Four wood screws are needed for securing the four plastic parts to the cabinet. I have used 3x16 screws with T10 heads, but the exact length should not critical provided it can attach firmly to the cabinet. See picture for reference.

I chose to print it in ABS, but any rigid filament is likely to work well given the weight distribution.

Print on its side and it needs no supports.