Optimized desiccant box for filament spools

Most box models are designed with holes and are slow to print because of the jumps. Mine use only walls and infill. You'll need to slice it correctly for this result (see 3mf files).

Print time on Prusa XL

Box:

• 1 in a print: 40 mins,
• 2 in a print: 56 min (26 mins each)
• 4 in a print: 105 min (24 mins each)

Lid:

• 1 in a print: 8 mins,
• 2 in a print: 14 min (7 mins each)
• 4 in a print: 28 min (7 mins each)

Print Settings 

All profiles are based on 0.6 nozzle and 0.32 layer height.

Lid

• From 0 to 2 mm
  •  Infill: Grid 60%
  • Bottom solid layer: 0
  • Top solid layer: 0
  • Perimeters: 10

• From 2 to 8 mm (for better threads only)
  • Layer height: 0.2m 

Box

• From 0 to 2 mm
  • Infill: Grid 60%
  • Bottom solid layer: 0
  • Top solid layer: 0
  • Perimeters: 5

• From 47 to 53 mm (for better threads only and overhang)
  • Layer height: 0.2m 

Happy prints